[2017 New] Lead2pass 100% Valid 70-743 Exam Questions PDF Free Download (41-50)

2017 June Microsoft Official New Released 70-743 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Amazing,100% candidates have passed the 70-743 exam by practising the preparation material of Lead2pass, because the braindumps are the latest and cover every aspect of 70-743 exam. Download the braindumps for an undeniable success in 70-743 exam.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-743.html

QUESTION 41
Your network contains an Active Directory forest named contoso.com.
The forest contains a member server named Server1 that runs Windows Server 2016 Server1 is located in the perimeter network.
You install the Active Directory Federation Services server role on Server1.
You create an Active Directory Federation Services (ADFS) farm by using a certificate that has a subject name of sts.contoso.com.
You need to enable certificate authentication from the Internet on Server1.
Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution?

A.    389
B.    443
C.    3389
D.    8531
E.    49443

Answer: BE
Explanation:
Configuring the following network services appropriately is critical for successful deployment of AD FS in your organization:
Configuring Corporate Firewall
* Both the firewall located between the Web Application Proxy and the federation server farm and the firewall between the clients and the Web Application Proxy must have TCP port 443 enabled inbound.
* In addition, if client user certificate authentication (clientTLS authentication using X509 user certificates) is required, AD FS in Windows Server 2012 R2 requires that TCP port 49443 be enabled inbound on the firewall between the clients and the Web Application Proxy. This is not required on the firewall between the Web Application Proxy and the federation servers).
References: https://technet.microsoft.com/en-us/library/dn554247(v=ws.11).aspx

QUESTION 42
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
You have three servers named Server1, Server2. Server3 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed.
Server3 has the iSCSI Target Server role service installed.
You need to create a Hyper-V cluster.
Which tool should you use first?

A.    the clussvc.exe command
B.    the cluster.exe command
C.    the Computer Management console
D.    the configurehyperv.exe command
E.    the Disk Management console
F.    the Failover Cluster Manager console
G.    the Hyper-V Manager console
H.    the Server Manager Desktop app

Answer: H

QUESTION 43
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have two servers named Server1 and Server2 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster.
You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?

Answer: F

QUESTION 44
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper-V host named Server1 at a secondary location.
A virtual machine named VM1 runs on Cluster1.
You configure a Hyper-V Replica of VM1 to Server1.
You need to perform a Test Fai lover of VM1.
Which tool should you use?

Answer: G

QUESTION 45
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2016 installed.
Server2 has Windows Server 2012 R2 installed. Each Hyper-V server has three network cards. Each network card is connected to a different subnet.
Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5.
What should you run1?

A.    the Mount-VHD cmdlet
B.    the Diskpart command
C.    the Set-VHD cmdlet
D.    the Set-VM cmdlet
E.    the Set-VMHost cmdlet
F.    the Set-VMProcessor cmdlet
G.    the Install-Windows Feature cmdlet
H.    the Optimize-VHD cmdlet

Answer: E
Explanation:
Set-VMHost -UseAnyNetworkForMigration
Specifies how networks are selected for incoming live migration traffic. If set to $True, any available network on the host can be used for this traffic. If set to $False, incoming live migration traffic is transmitted only on the networks specified in the MigrationNetworks property of the host.
References: https://technet.microsoft.com/en-us/library/hh848524.aspx

QUESTION 46
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1.
What should you run on Server1?

Answer: F
Explanation:
Configure Nested Virtualization
1. Create a virtual machine.
2. While the virtual machine is in the OFF state, run the following command on the physical Hyper-V host. This enables nested virtualization for the virtual machine.
Set-VMProcessor -VMName <VMName> -ExposeVirtualizationExtensions $true
Etc.
References: https://msdn.microsoft.com/en-us/virtualization/hyperv_on_windows/user_guide/nesting

QUESTION 47
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space.
You need to reduce the amount of disk space used by the VHD.
What should you run?

Answer: H
Explanation:
https://technet.microsoft.com/en-us/library/hh848458.aspx

QUESTION 48
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016.
You plan to deploy several shielded virtual machines on Server1.
You deploy a Host Guardian on a new server
You need to ensure that Server1 can host shielded virtual machines.
What should you run first?

Answer: G
Explanation:
Installing Host Guardian Service (HGS) Role
On a machine running Windows Server 2016, install the Host Guardian Service role using Server Manager or Windows PowerShell.
From the command line issue the following command:
Install-WindowsFeature HostGuardianServiceRole –IncludeManagementTools
References: https://blogs.technet.microsoft.com/datacentersecurity/2016/03/16/windows-server-2016-and-host-guardian-service-for-shielded-vms/

QUESTION 49
Note: This question is part of a series of questions that use the same similar answer choices.
An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 has a virtual machine named VM1 that uses a single VHDX file.
VM1 is configured shown in the following table

You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines.
You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?

Answer: B

QUESTION 50
In this section, you’ll see one or more sets of questions with the same scenario and problem.
Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem.
It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result.
These questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario.
Each question in the series contains a unique solution Determine whether the solution meets the stated goals.

Your network contains an Active Directory forest named contoso.com.
The forest contains a member server named Server1 that runs Windows Server 2016.
All domain controllers run Windows Server 2012 R2.
Contoso com has the following configuration.

You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration.
You need to configure Active Directory to support the planned deployment.
Solution: You upgrade a domain controller to Windows Server 2016.
Does this meet the goal?

A. Yes
B. No

Answer: A
Explanation:
Windows Server 2016 Domain controller is required for Device Registration for Servers that run Windows Server 2016.
References: https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/operations/configure-device-based-conditional-access-on-premises

You can pass Microsoft 70-743 exam if you get a complete hold of 70-743 braindumps in Lead2pass. What’s more, all the 70-743 Certification exam Q and As provided by Lead2pass are the latest.

Microsoft 70-743 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDWGpUeXZ3ZE9ZX3c

2017 Microsoft 70-743 exam dumps (All 97 Q&As) from Lead2pass:

http://www.lead2pass.com/70-743.html [100% Exam Pass Guaranteed]